ADD：Dalan Industrial Zone, Guanyao, Shishan Town, Nanhai District, Foshan City
TEL：0757-81198777 85222800
FAX：0757-81198311 85222638
TEL：0757-81198777 85222800
FAX：0757-81198311 85222638
Company News Your location :Home > News > Company News
Introduced several cabinet choices
1, define the size of the server cabinet
We usually refer to the server "U" is a representation of the external dimensions of the server unit is Unit abbreviations by industry groups as the American Electronics Industry Association (EIA) decision. The reason should be provided that the size of the server is to enable the server to maintain the appropriate size on iron or aluminum rack.
Size requirement is a server wide (48.26cm = 19 inches) and high (4.445cm multiples). As the width is 19 inches, so it will meet the requirements of the rack is called "19-inch rack", and this size is the width of the rack-mounted servers.
2, select the server rack space considerations
Plans and lists all installed in a rack full of equipment and their measurement data: high, length, width, weight. Combination of these devices the size and space occupied, you will choose will ultimately determine how much cabinet. Clearly, the high cabinets can be put into more equipment, but also provincial areas.
Make full use of the height of the cabinet is not the only consideration, the rear of the cabinet is also a great place to use. This is the reason to measure the depth of the cabinet. Choose deep cabinets, two sets of equipment can be loaded into the back to back to install more equipment.
In calculating the finished cabinet space (with "U" or 1.75 inches), the size of the cabinet should also be considered. No one will want to see filled soon after the cabinet should be found to put some equipment. Therefore, as a basic principle, Cabinet height 20% to 30% per cent more to prepare for system expansion. The space also improves the ventilation conditions.
3, select the server rack bracket also need to pay attention to the problem
With stent devices do not need to consider the width, because it is designed according to the width of the cabinet. Since the total weight of the equipment often do not light, so to choose the cabinet load indicators must be considered, that is, the force structure to choose a good, solid cabinet. In addition, the total weight of the equipment rack and the engine room floor with intensity.
Inside the cabinet, decided to choose the weight of the sliding equipment rack is the standard or heavier, and also determines the choice of some other accessories. Election can be 100% compatible with all server cabinets, it is to meet or exceed all OEM's standard third-class bracket. If you want to install the tower or desktop devices, sliding shelves and installation accessories are required.
As the installation including network cables, telecommunication cables and power cables, you need to buy hook ring or toothed belts to effectively put the cable inside the cabinet fixed order. If the cabinet with a cable management module so that the cable can be directly fixed to the vertical mounting rails inside, you could not be better. In either case, the cabinet on the wall and inside wall should have enough fixed ring (to protect the cable), or by the cabinet floor elevation to the following alignment.
4, need to pay attention to all aspects of
With the availability of the data center toward the direction of the overall development of the cabinet room of the growing demand management. User in choosing the cabinet should consider the following factors:
Load-bearing guarantee - with product placement within the cabinet to increase the density, good load-bearing capacity is a qualified cabinet product requirements. Does not meet the specifications of the cabinet, can not effectively protect the equipment inside the enclosure, and may even affect the whole system.
Temperature control system - inside the cabinet has good temperature control system to avoid overheating of the product inside the cabinet or too cold, to ensure the efficient operation of the device. Cabinet may choose full ventilation series, can be equipped with fan (fan with lifetime guarantee), in the hot environment can be installed stand-alone air-conditioning systems, can be installed in a cold environment, independent heating insulation system.
We usually refer to the server "U" is a representation of the external dimensions of the server unit is Unit abbreviations by industry groups as the American Electronics Industry Association (EIA) decision. The reason should be provided that the size of the server is to enable the server to maintain the appropriate size on iron or aluminum rack.
Size requirement is a server wide (48.26cm = 19 inches) and high (4.445cm multiples). As the width is 19 inches, so it will meet the requirements of the rack is called "19-inch rack", and this size is the width of the rack-mounted servers.
2, select the server rack space considerations
Plans and lists all installed in a rack full of equipment and their measurement data: high, length, width, weight. Combination of these devices the size and space occupied, you will choose will ultimately determine how much cabinet. Clearly, the high cabinets can be put into more equipment, but also provincial areas.
Make full use of the height of the cabinet is not the only consideration, the rear of the cabinet is also a great place to use. This is the reason to measure the depth of the cabinet. Choose deep cabinets, two sets of equipment can be loaded into the back to back to install more equipment.
In calculating the finished cabinet space (with "U" or 1.75 inches), the size of the cabinet should also be considered. No one will want to see filled soon after the cabinet should be found to put some equipment. Therefore, as a basic principle, Cabinet height 20% to 30% per cent more to prepare for system expansion. The space also improves the ventilation conditions.
3, select the server rack bracket also need to pay attention to the problem
With stent devices do not need to consider the width, because it is designed according to the width of the cabinet. Since the total weight of the equipment often do not light, so to choose the cabinet load indicators must be considered, that is, the force structure to choose a good, solid cabinet. In addition, the total weight of the equipment rack and the engine room floor with intensity.
Inside the cabinet, decided to choose the weight of the sliding equipment rack is the standard or heavier, and also determines the choice of some other accessories. Election can be 100% compatible with all server cabinets, it is to meet or exceed all OEM's standard third-class bracket. If you want to install the tower or desktop devices, sliding shelves and installation accessories are required.
As the installation including network cables, telecommunication cables and power cables, you need to buy hook ring or toothed belts to effectively put the cable inside the cabinet fixed order. If the cabinet with a cable management module so that the cable can be directly fixed to the vertical mounting rails inside, you could not be better. In either case, the cabinet on the wall and inside wall should have enough fixed ring (to protect the cable), or by the cabinet floor elevation to the following alignment.
4, need to pay attention to all aspects of
With the availability of the data center toward the direction of the overall development of the cabinet room of the growing demand management. User in choosing the cabinet should consider the following factors:
Load-bearing guarantee - with product placement within the cabinet to increase the density, good load-bearing capacity is a qualified cabinet product requirements. Does not meet the specifications of the cabinet, can not effectively protect the equipment inside the enclosure, and may even affect the whole system.
Temperature control system - inside the cabinet has good temperature control system to avoid overheating of the product inside the cabinet or too cold, to ensure the efficient operation of the device. Cabinet may choose full ventilation series, can be equipped with fan (fan with lifetime guarantee), in the hot environment can be installed stand-alone air-conditioning systems, can be installed in a cold environment, independent heating insulation system.
